20050307-allegro-06-ruddersquare:
Then, using more of the thickened epoxy, I mounted my rudder on the boom and ensured it was square, and ensured that it was mounted straight on the boom. I used a square to ensure that it was truly vertical, but ensuring it was straight with the boom is more of a TLAR (that looks about right) issue. I also checked this lay-up a couple hours later to ensure everything was still straight -- and the v-mount was *slightly* tilted. In the end, everything turned out OK!
20050307-allegro-06-ruddersquare:
Then, using more of the thickened epoxy, I mounted my rudder on the boom and ensured it was square, and ensured that it was mounted straight on the boom. I used a square to ensure that it was truly vertical, but ensuring it was straight with the boom is more of a TLAR (that looks about right) issue. I also checked this lay-up a couple hours later to ensure everything was still straight -- and the v-mount was *slightly* tilted. In the end, everything turned out OK!